Linux version 2.6.19-rc5-mm2-1 (mattia@tadamune) (gcc version 4.1.2 20061028 (prerelease) (Debian 4.1.1-19)) #9 SMP Wed Nov 15 19:13:45 CET 2006 BIOS-provided physical RAM map: sanitize start sanitize end copy_e820_map() start: 0000000000000000 size: 000000000009f800 end: 000000000009f800 type: 1 copy_e820_map() type is E820_RAM copy_e820_map() start: 000000000009f800 size: 0000000000000800 end: 00000000000a0000 type: 2 copy_e820_map() start: 00000000000dc000 size: 0000000000024000 end: 0000000000100000 type: 2 copy_e820_map() start: 0000000000100000 size: 000000003f570000 end: 000000003f670000 type: 1 copy_e820_map() type is E820_RAM copy_e820_map() start: 000000003f670000 size: 0000000000090000 end: 000000003f700000 type: 4 copy_e820_map() start: 000000003f700000 size: 0000000000900000 end: 0000000040000000 type: 2 copy_e820_map() start: 00000000e0000000 size: 0000000010000000 end: 00000000f0000000 type: 2 copy_e820_map() start: 00000000fec00000 size: 0000000000010000 end: 00000000fec10000 type: 2 copy_e820_map() start: 00000000fed14000 size: 0000000000006000 end: 00000000fed1a000 type: 2 copy_e820_map() start: 00000000fed1c000 size: 0000000000074000 end: 00000000fed90000 type: 2 copy_e820_map() start: 00000000fee00000 size: 0000000000001000 end: 00000000fee01000 type: 2 copy_e820_map() start: 00000000ff000000 size: 0000000001000000 end: 0000000100000000 type: 2 BIOS-e820: 0000000000000000 - 000000000009f800 (usable) BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000003f670000 (usable) BIOS-e820: 000000003f670000 - 000000003f700000 (ACPI NVS) BIOS-e820: 000000003f700000 - 0000000040000000 (reserved) BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved) BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved) BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved) BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved) 118MB HIGHMEM available. 896MB LOWMEM available. found SMP MP-table at 000f6480 Entering add_active_range(0, 0, 259696) 0 entries of 256 used Zone PFN ranges: DMA 0 -> 4096 Normal 4096 -> 229376 HighMem 229376 -> 259696 early_node_map[1] active PFN ranges 0: 0 -> 259696 On node 0 totalpages: 259696 DMA zone: 32 pages used for memmap DMA zone: 0 pages reserved DMA zone: 4064 pages, LIFO batch:0 Normal zone: 1760 pages used for memmap Normal zone: 223520 pages, LIFO batch:31 HighMem zone: 236 pages used for memmap HighMem zone: 30084 pages, LIFO batch:7 DMI present. ACPI: RSDP (v000 PTLTD ) @ 0x000f63b0 ACPI: RSDT (v001 Sony N0 0x20060710 PTL 0x00000000) @ 0x3f6764ef ACPI: FADT (v002 Sony N0 0x20060710 PTL 0x0000005a) @ 0x3f67ddde ACPI: MADT (v001 Sony N0 0x20060710 PTL 0x0000005a) @ 0x3f67de62 ACPI: BOOT (v001 Sony N0 0x20060710 PTL 0x00000001) @ 0x3f67dfd8 ACPI: MCFG (v001 Sony N0 0x20060710 PTL 0x0000005a) @ 0x3f67df02 ACPI: TCPA (v001 Sony N0 0x20060710 PTL 0x00005a52) @ 0x3f67df3e ACPI: MADT (v001 Sony N0 0x20060710 PTL 0x00000000) @ 0x3f67df70 ACPI: SSDT (v001 Sony N0 0x20060710 PTL 0x20050624) @ 0x3f6776b1 ACPI: SSDT (v001 Sony N0 0x20060710 PTL 0x20050624) @ 0x3f676ee6 ACPI: SSDT (v001 Sony N0 0x20060710 PTL 0x20050624) @ 0x3f676537 ACPI: DSDT (v001 Sony N0 0x20060710 PTL 0x0100000e) @ 0x00000000 ACPI: PM-Timer IO Port: 0x1008 ACPI: Local APIC address 0xfee00000 ACPI: 2 duplicate APIC table ignored. ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) Processor #0 6:15 APIC version 20 ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) Processor #1 6:15 APIC version 20 ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. Enabling APIC mode: Flat. Using 1 I/O APICs Using ACPI (MADT) for SMP configuration information Allocating PCI resources starting at 50000000 (gap: 40000000:a0000000) Detected 1833.492 MHz processor. Built 1 zonelists. Total pages: 257668 Kernel command line: root=/dev/sda3 ro vga=extended mapped APIC to ffffd000 (fee00000) mapped IOAPIC to ffffc000 (fec00000) Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Initializing CPU#0 Clock event device pit configured with caps set: 07 PID hash table entries: 4096 (order: 12, 16384 bytes) Console: colour VGA+ 80x50 Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) Memory: 1025584k/1038784k available (1848k kernel code, 12536k reserved, 665k data, 208k init, 121280k highmem) virtual kernel memory layout: fixmap : 0xfff9d000 - 0xfffff000 ( 392 kB) pkmap : 0xff800000 - 0xffc00000 (4096 kB) vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB) lowmem : 0xc0000000 - 0xf8000000 ( 896 MB) .init : 0xc03c8000 - 0xc03fc000 ( 208 kB) .data : 0xc02ce1a2 - 0xc0374874 ( 665 kB) .text : 0xc0100000 - 0xc02ce1a2 (1848 kB) Checking if this processor honours the WP bit even in supervisor mode... Ok. Calibrating delay using timer specific routine.. 3671.25 BogoMIPS (lpj=7342509) Security Framework v1.0.0 initialized Capability LSM initialized Mount-cache hash table entries: 512 CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000e3bd 00000000 00000001 monitor/mwait feature present. using mwait in idle threads. CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 2048K CPU: Physical Processor ID: 0 CPU: Processor Core ID: 0 CPU: After all inits, caps: bfebfbff 20100000 00000000 00001940 0000e3bd 00000000 00000001 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. Compat vDSO mapped to ffffe000. Checking 'hlt' instruction... OK. SMP alternatives: switching to UP code ACPI: Core revision 20060707 tbxface-0107 [01] load_tables : ACPI Tables successfully acquired Parsing all Control Methods: Table [DSDT](id 0008) - 923 Objects with 104 Devices 193 Methods 29 Regions Parsing all Control Methods: Table [SSDT](id 0004) - 13 Objects with 3 Devices 4 Methods 0 Regions Parsing all Control Methods: Table [SSDT](id 0005) - 14 Objects with 3 Devices 5 Methods 0 Regions Parsing all Control Methods: Table [SSDT](id 0006) - 13 Objects with 0 Devices 4 Methods 0 Regions ACPI Namespace successfully loaded at root c0446c30 evxfevnt-0089 [02] enable : Transition to ACPI mode successful CPU0: Intel(R) Core(TM)2 CPU T5600 @ 1.83GHz stepping 06 SMP alternatives: switching to SMP code Booting processor 1/1 eip 3000 Initializing CPU#1 Calibrating delay using timer specific routine.. 3667.28 BogoMIPS (lpj=7334560) CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000e3bd 00000000 00000001 monitor/mwait feature present. CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 2048K CPU: Physical Processor ID: 0 CPU: Processor Core ID: 1 CPU: After all inits, caps: bfebfbff 20100000 00000000 00001940 0000e3bd 00000000 00000001 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#1. CPU1: Intel(R) Core(TM)2 CPU T5600 @ 1.83GHz stepping 06 Total of 2 processors activated (7338.53 BogoMIPS). ENABLING IO-APIC IRQs ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1 Clock event device pit new caps set: 01 Clock event device lapic configured with caps set: 06 checking TSC synchronization across 2 CPUs: passed. Clock event device pit new caps set: 01 Clock event device lapic configured with caps set: 06 Brought up 2 CPUs migration_cost=54 NET: Registered protocol family 16 ACPI: bus type pci registered PCI: Using MMCONFIG Setting up standard PCI resources evgpeblk-0951 [04] ev_create_gpe_block : GPE 00 to 1F [_GPE] 4 regs on int 0x9 evgpeblk-1048 [03] ev_initialize_gpe_bloc: Found 8 Wake, Enabled 5 Runtime GPEs in this block Completing Region/Field/Buffer/Package initialization:......................................................................... Initialized 29/29 Regions 4/4 Fields 29/29 Buffers 11/38 Packages (972 nodes) Initializing Device/Processor/Thermal objects by executing _INI methods:... Executed 3 _INI methods requiring 2 _STA executions (examined 117 objects) ACPI: Interpreter enabled ACPI: Using IOAPIC for interrupt routing ACPI: PCI Root Bridge [PCI0] (0000:00) Boot video device is 0000:00:02.0 PCI quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO PCI quirk: region 1180-11bf claimed by ICH6 GPIO PCI: Transparent bridge - 0000:00:1e.0 PCI: Bus #0a (-#0d) is hidden behind transparent bridge #09 (-#0a) (try 'pci=assign-busses') Please report the result to linux-kernel to fix this permanently ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP04._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs 10) *5 ACPI: PCI Interrupt Link [LNKB] (IRQs *10) ACPI: PCI Interrupt Link [LNKC] (IRQs *10) ACPI: PCI Interrupt Link [LNKD] (IRQs *10) ACPI: PCI Interrupt Link [LNKE] (IRQs 10) *0, disabled. ACPI: PCI Interrupt Link [LNKF] (IRQs *10) ACPI: PCI Interrupt Link [LNKG] (IRQs *10) ACPI: PCI Interrupt Link [LNKH] (IRQs *10) Linux Plug and Play Support v0.97 (c) Adam Belay pnp: PnP ACPI init pnp: PnP ACPI: found 11 devices PnPBIOS: Disabled by ACPI PNP SCSI subsystem initialized libata version 2.00 loaded. PCI: Using ACPI for IRQ routing PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report PCI: Ignore bogus resource 6 [0:0] of 0000:00:02.0 PCI: Bridge: 0000:00:1c.0 IO window: 2000-2fff MEM window: d6000000-d7ffffff PREFETCH window: d0000000-d1ffffff PCI: Bridge: 0000:00:1c.1 IO window: disabled. MEM window: dc100000-dc1fffff PREFETCH window: disabled. PCI: Bridge: 0000:00:1c.2 IO window: 3000-3fff MEM window: d8000000-d9ffffff PREFETCH window: d2000000-d3ffffff PCI: Bridge: 0000:00:1c.3 IO window: 4000-4fff MEM window: da000000-dbffffff PREFETCH window: d4000000-d5ffffff PCI: Bus 10, cardbus bridge: 0000:09:04.0 IO window: 00005000-000050ff IO window: 00005400-000054ff PREFETCH window: 50000000-51ffffff MEM window: 52000000-53ffffff PCI: Bridge: 0000:00:1e.0 IO window: 5000-5fff MEM window: dc000000-dc0fffff PREFETCH window: 50000000-51ffffff ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 16 PCI: Setting latency timer of device 0000:00:1c.0 to 64 ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 17 (level, low) -> IRQ 17 PCI: Setting latency timer of device 0000:00:1c.1 to 64 ACPI: PCI Interrupt 0000:00:1c.2[C] -> GSI 18 (level, low) -> IRQ 18 PCI: Setting latency timer of device 0000:00:1c.2 to 64 ACPI: PCI Interrupt 0000:00:1c.3[D] -> GSI 19 (level, low) -> IRQ 19 PCI: Setting latency timer of device 0000:00:1c.3 to 64 PCI: Setting latency timer of device 0000:00:1e.0 to 64 ACPI: PCI Interrupt 0000:09:04.0[A] -> GSI 20 (level, low) -> IRQ 20 NET: Registered protocol family 2 IP route cache hash table entries: 32768 (order: 5, 131072 bytes) TCP established hash table entries: 131072 (order: 8, 1048576 bytes) TCP bind hash table entries: 65536 (order: 7, 524288 bytes) TCP: Hash tables configured (established 131072 bind 65536) TCP reno registered Simple Boot Flag at 0x37 set to 0x1 audit: initializing netlink socket (disabled) audit(1163693908.584:1): initialized KEVENT subsystem has been successfully registered. KEVENT: Added callbacks for type 2. KEVENT: Added callbacks for type 3. Kevent poll()/select() subsystem has been initialized. KEVENT: Added callbacks for type 0. highmem bounce pool size: 64 pages JFS: nTxBlock = 8014, nTxLock = 64116 io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered (default) PCI: Setting latency timer of device 0000:00:1c.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:1c.0:pcie00] Allocate Port Service[0000:00:1c.0:pcie02] Allocate Port Service[0000:00:1c.0:pcie03] PCI: Setting latency timer of device 0000:00:1c.1 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:1c.1:pcie00] Allocate Port Service[0000:00:1c.1:pcie02] Allocate Port Service[0000:00:1c.1:pcie03] PCI: Setting latency timer of device 0000:00:1c.2 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:1c.2:pcie00] Allocate Port Service[0000:00:1c.2:pcie02] Allocate Port Service[0000:00:1c.2:pcie03] PCI: Setting latency timer of device 0000:00:1c.3 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:1c.3:pcie00] Allocate Port Service[0000:00:1c.3:pcie02] Allocate Port Service[0000:00:1c.3:pcie03] isapnp: Scanning for PnP cards... isapnp: No Plug & Play device found Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx ICH7: IDE controller at PCI slot 0000:00:1f.1 ACPI: PCI Interrupt 0000:00:1f.1[B] -> GSI 22 (level, low) -> IRQ 21 ICH7: chipset revision 2 ICH7: not 100% native mode: will probe irqs later ide0: BM-DMA at 0x1810-0x1817, BIOS settings: hda:DMA, hdb:pio Probing IDE interface ide0... hda: MATSHITADVD-RAM UJ-842S, ATAPI CD/DVD-ROM drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 ata_piix 0000:00:1f.2: version 2.00ac7 ata_piix 0000:00:1f.2: MAP [ P0 P2 XX XX ] ata_piix 0000:00:1f.2: invalid MAP value 0 ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 22 (level, low) -> IRQ 21 PCI: Setting latency timer of device 0000:00:1f.2 to 64 ata1: SATA max UDMA/133 cmd 0x18D0 ctl 0x18C6 bmdma 0x18B0 irq 21 ata2: SATA max UDMA/133 cmd 0x18C8 ctl 0x18C2 bmdma 0x18B8 irq 21 scsi0 : ata_piix ata1.00: ATA-6, max UDMA/100, 195371568 sectors: LBA48 NCQ (depth 0/32) ata1.00: ata1: dev 0 multi count 16 ata1.00: configured for UDMA/100 scsi1 : ata_piix ATA: abnormal status 0x7F on port 0x18CF scsi 0:0:0:0: Direct-Access ATA TOSHIBA MK1032GS AS02 PQ: 0 ANSI: 5 SCSI device sda: 195371568 512-byte hdwr sectors (100030 MB) sda: Write Protect is off sda: Mode Sense: 00 3a 00 00 SCSI device sda: drive cache: write back SCSI device sda: 195371568 512-byte hdwr sectors (100030 MB) sda: Write Protect is off sda: Mode Sense: 00 3a 00 00 SCSI device sda: drive cache: write back sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 > sd 0:0:0:0: Attached scsi disk sda PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX port at 0x60,0x64 irq 12 mice: PS/2 mouse device common for all mice TCP bic registered NET: Registered protocol family 1 NET: Registered protocol family 17 NET: Registered protocol family 8 NET: Registered protocol family 20 Starting balanced_irq Using IPI No-Shortcut mode ACPI: (supports S0 S3 S4 S5) Time: tsc clocksource has been installed. input: AT Translated Set 2 keyboard as /class/input/input0 VFS: Mounted root (jfs filesystem) readonly. Freeing unused kernel memory: 208k freed input: PC Speaker as /class/input/input1 usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb ehci_hcd: Unknown symbol usb_hcd_pci_suspend ehci_hcd: Unknown symbol usb_free_urb ehci_hcd: Unknown symbol usb_hub_tt_clear_buffer ehci_hcd: Unknown symbol usb_hcd_resume_root_hub ehci_hcd: Unknown symbol usb_hcd_pci_probe ehci_hcd: Unknown symbol usb_calc_bus_time ehci_hcd: Unknown symbol usb_hcd_pci_shutdown ehci_hcd: Unknown symbol usb_hcd_pci_resume ehci_hcd: Unknown symbol usb_get_urb ehci_hcd: Unknown symbol usb_hcd_giveback_urb ehci_hcd: Unknown symbol usb_hcd_pci_remove ehci_hcd: Unknown symbol usb_root_hub_lost_power ieee1394: Initialized config rom entry `ip1394' tpm_inf_pnp 00:07: Found TPM with ID IFX0102 tpm_inf_pnp 00:07: TPM found: config base 0x2e, io base 0x1670, chip version 0x000b, vendor id 0x15d1 (Infineon), product id 0x000b (SLB 9635 TT 1.2) USB Universal Host Controller Interface driver v3.0 ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 19 (level, low) -> IRQ 19 PCI: Setting latency timer of device 0000:00:1d.0 to 64 uhci_hcd 0000:00:1d.0: UHCI Host Controller uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1 uhci_hcd 0000:00:1d.0: irq 19, io base 0x00001820 usb usb1: new device found, idVendor=0000, idProduct=0000 usb usb1: new device strings: Mfr=3, Product=2, SerialNumber=1 usb usb1: Product: UHCI Host Controller usb usb1: Manufacturer: Linux 2.6.19-rc5-mm2-1 uhci_hcd usb usb1: SerialNumber: 0000:00:1d.0 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 2 ports detected Real Time Clock Driver v1.12ac Linux agpgart interface v0.101 (c) Dave Jones ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 19 PCI: Setting latency timer of device 0000:00:1d.1 to 64 uhci_hcd 0000:00:1d.1: UHCI Host Controller uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2 uhci_hcd 0000:00:1d.1: irq 19, io base 0x00001840 usb usb2: new device found, idVendor=0000, idProduct=0000 usb usb2: new device strings: Mfr=3, Product=2, SerialNumber=1 usb usb2: Product: UHCI Host Controller usb usb2: Manufacturer: Linux 2.6.19-rc5-mm2-1 uhci_hcd usb usb2: SerialNumber: 0000:00:1d.1 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected hda: ATAPI 24X DVD-ROM DVD-R-RAM CD-R/RW drive, 2048kB Cache, UDMA(33) Uniform CD-ROM driver Revision: 3.20 ieee80211_crypt: registered algorithm 'NULL' ieee80211: 802.11 data/management/control stack, git-1.1.13 ieee80211: Copyright (C) 2004-2005 Intel Corporation ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 19 (level, low) -> IRQ 19 PCI: Setting latency timer of device 0000:00:1d.2 to 64 uhci_hcd 0000:00:1d.2: UHCI Host Controller uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3 uhci_hcd 0000:00:1d.2: irq 19, io base 0x00001860 usb usb3: new device found, idVendor=0000, idProduct=0000 usb usb3: new device strings: Mfr=3, Product=2, SerialNumber=1 usb usb3: Product: UHCI Host Controller usb usb3: Manufacturer: Linux 2.6.19-rc5-mm2-1 uhci_hcd usb usb3: SerialNumber: 0000:00:1d.2 usb usb3: configuration #1 chosen from 1 choice hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected input: PS/2 Mouse as /class/input/input2 input: AlpsPS/2 ALPS GlidePoint as /class/input/input3 ipw3945: Intel(R) PRO/Wireless 3945 Network Connection driver for Linux, 1.1.2d ipw3945: Copyright(c) 2003-2006 Intel Corporation ACPI: PCI Interrupt 0000:00:1d.3[A] -> GSI 19 (level, low) -> IRQ 19 PCI: Setting latency timer of device 0000:00:1d.3 to 64 uhci_hcd 0000:00:1d.3: UHCI Host Controller uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4 uhci_hcd 0000:00:1d.3: irq 19, io base 0x00001880 usb usb4: new device found, idVendor=0000, idProduct=0000 usb usb4: new device strings: Mfr=3, Product=2, SerialNumber=1 usb usb4: Product: UHCI Host Controller usb usb4: Manufacturer: Linux 2.6.19-rc5-mm2-1 uhci_hcd usb usb4: SerialNumber: 0000:00:1d.3 usb usb4: configuration #1 chosen from 1 choice hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:09:04.2[C] -> GSI 22 (level, low) -> IRQ 21 ACPI: PCI Interrupt 0000:07:00.0[A] -> GSI 18 (level, low) -> IRQ 18 PCI: Setting latency timer of device 0000:07:00.0 to 64 sky2 v1.10 addr 0xd8000000 irq 18 Yukon-FE (0xb7) rev 1 sky2 eth0: addr 00:13:a9:41:76:84 Yenta: CardBus bridge found at 0000:09:04.0 [104d:81e6] Yenta: Enabling burst memory read transactions Yenta: Using CSCINT to route CSC interrupts to PCI Yenta: Routing CardBus interrupts to PCI Yenta TI: socket 0000:09:04.0, mfunc 0x01a21b22, devctl 0x64 usb 2-2: new full speed USB device using uhci_hcd and address 2 Yenta: ISA IRQ mask 0x0cf8, PCI irq 20 Socket status: 30000006 Yenta: Raising subordinate bus# of parent bus (#09) from #0a to #0d pcmcia: parent PCI bridge I/O window: 0x5000 - 0x5fff cs: IO port probe 0x5000-0x5fff: clean. pcmcia: parent PCI bridge Memory window: 0xdc000000 - 0xdc0fffff pcmcia: parent PCI bridge Memory window: 0x50000000 - 0x51ffffff ACPI: PCI Interrupt 0000:09:04.1[B] -> GSI 21 (level, low) -> IRQ 22 usb 2-2: new device found, idVendor=054c, idProduct=0281 usb 2-2: new device strings: Mfr=1, Product=2, SerialNumber=3 usb 2-2: Product: UMH-U09 usb 2-2: Manufacturer: Sony usb 2-2: SerialNumber: F000001C9B3A usb 2-2: configuration #1 chosen from 1 choice ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[22] MMIO=[dc005000-dc0057ff] Max Packet=[2048] IR/IT contexts=[4/8] agpgart: Detected an Intel 945GM Chipset. agpgart: Detected 7932K stolen memory. agpgart: AGP aperture is 256M @ 0xc0000000 ACPI: PCI Interrupt 0000:06:00.0[A] -> GSI 17 (level, low) -> IRQ 17 PCI: Setting latency timer of device 0000:06:00.0 to 64 ipw3945: Detected Intel PRO/Wireless 3945ABG Network Connection Initializing USB Mass Storage driver... ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 21 (level, low) -> IRQ 22 PCI: Setting latency timer of device 0000:00:1b.0 to 64 usb 3-1: new full speed USB device using uhci_hcd and address 2 cs: IO port probe 0x100-0x3af: clean. cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7 cs: IO port probe 0x820-0x8ff: clean. cs: IO port probe 0xc00-0xcf7: clean. cs: IO port probe 0xa00-0xaff: clean. usb 3-1: new device found, idVendor=0483, idProduct=2016 usb 3-1: new device strings: Mfr=1, Product=2, SerialNumber=0 usb 3-1: Product: Biometric Coprocessor usb 3-1: Manufacturer: STMicroelectronics usb 3-1: configuration #1 chosen from 1 choice usb 3-2: new full speed USB device using uhci_hcd and address 3 usb 3-2: new device found, idVendor=05ca, idProduct=1830 usb 3-2: new device strings: Mfr=0, Product=0, SerialNumber=0 usb 3-2: configuration #1 chosen from 1 choice usb 4-1: new low speed USB device using uhci_hcd and address 2 usb 4-1: new device found, idVendor=054c, idProduct=01bb usb 4-1: new device strings: Mfr=0, Product=0, SerialNumber=0 usb 4-1: configuration #1 chosen from 1 choice ieee1394: Host added: ID:BUS[0-00:1023] GUID[080046030227e7bb] eth1394: eth1: IEEE-1394 IPv4 over 1394 Ethernet (fw-host0) usb 4-2: new full speed USB device using uhci_hcd and address 3 usb 4-2: new device found, idVendor=044e, idProduct=300c usb 4-2: new device strings: Mfr=1, Product=2, SerialNumber=0 usb 4-2: Product: UGX usb 4-2: Manufacturer: ALPS usb 4-2: configuration #1 chosen from 1 choice scsi2 : SCSI emulation for USB Mass Storage devices usb-storage: device found at 2 usb-storage: waiting for device to settle before scanning usbcore: registered new interface driver usb-storage USB Mass Storage support registered. Bluetooth: Core ver 2.11 NET: Registered protocol family 31 Bluetooth: HCI device and connection manager initialized Bluetooth: HCI socket layer initialized Bluetooth: HCI USB driver ver 2.9 usbcore: registered new interface driver hci_usb Adding 979924k swap on /dev/sda5. Priority:-1 extents:1 across:979924k loop: loaded (max 8 devices) ACPI Sony Notebook Control Driver v0.3 successfully installed sonypi: Sony Programmable I/O Controller Driver v1.26. sonypi: detected type3 model, verbose = 0, fnkeyinit = off, camera = off, compat = off, mask = 0xffffffff, useinput = on, acpi = on sonypi: enabled at irq=11, port1=0x1080, port2=0x1084 sonypi: device allocated minor is 62 input: Sony Vaio Jogdial as /class/input/input4 input: Sony Vaio Keys as /class/input/input5 device-mapper: ioctl: 4.10.0-ioctl (2006-09-14) initialised: dm-devel@redhat.com ipw3945: Detected geography ABG (13 802.11bg channels, 12 802.11a channels) sky2 eth0: enabling interface scsi 2:0:0:0: Direct-Access Sony USB HS-CARD 4.52 PQ: 0 ANSI: 0 sd 2:0:0:0: Attached scsi removable disk sdb usb-storage: device scan complete ip_tables: (C) 2000-2006 Netfilter Core Team Netfilter messages via NETLINK v0.30. ip_conntrack version 2.4 (8115 buckets, 64920 max) - 232 bytes per conntrack ACPI: Battery Slot [BAT1] (battery present) ACPI: AC Adapter [ACAD] (on-line) Parsing all Control Methods: Table [SSDT](id 00F5) - 5 Objects with 0 Devices 3 Methods 0 Regions ACPI (exconfig-0455): Dynamic SSDT Load - OemId [ Sony] OemTableId [ N0] [20060707] Parsing all Control Methods: Table [SSDT](id 00F6) - 1 Objects with 0 Devices 1 Methods 0 Regions ACPI (exconfig-0455): Dynamic SSDT Load - OemId [ Sony] OemTableId [ N0] [20060707] ACPI: CPU0 (power states: C1[C1] C2[C2]) ACPI: Processor [CPU0] (supports 8 throttling states) Parsing all Control Methods: Table [SSDT](id 00FB) - 3 Objects with 0 Devices 3 Methods 0 Regions ACPI (exconfig-0455): Dynamic SSDT Load - OemId [ Sony] OemTableId [ N0] [20060707] Parsing all Control Methods: Table [SSDT](id 00FC) - 1 Objects with 0 Devices 1 Methods 0 Regions ACPI (exconfig-0455): Dynamic SSDT Load - OemId [ Sony] OemTableId [ N0] [20060707] ACPI: CPU1 (power states: C1[C1] C2[C2]) ACPI: Processor [CPU1] (supports 8 throttling states) input: Lid Switch as /class/input/input6 ACPI: Lid Switch [LID0] input: Power Button (CM) as /class/input/input7 ACPI: Power Button (CM) [PWRB] Time: acpi_pm clocksource has been installed. ACPI: Thermal Zone [ATF0] (37 C) ACPI: Thermal Zone [DTS0] (34 C) ACPI: Thermal Zone [DTS1] (38 C) acpi_processor-0742 [00] processor_preregister_: Error while parsing _PSD domain information. Assuming no coordination NET: Registered protocol family 10 ADDRCONF(NETDEV_UP): eth0: link is not ready eth2: no IPv6 routers present ieee1394: Node removed: ID:BUS[0-00:1023] GUID[080046030227e7bb] ieee1394: Node removed: ID:BUS[20754571-38:0391] GUID[00000000f8eb5067] BUG: unable to handle kernel NULL pointer dereference at virtual address 000000a4 printing eip: c0238c60 *pde = 00000000 Oops: 0000 [#1] SMP last sysfs file: /devices/pci0000:00/0000:00:1c.1/0000:06:00.0/cmd Modules linked in: ipv6 cpufreq_ondemand acpi_cpufreq freq_table thermal fan button processor ac battery ipt_MASQUERADE iptable_nat ip_nat xt_tcpudp xt_state ip_conntrack nfnetlink iptable_filter ip_tables x_tables dm_snapshot dm_mirror dm_mod sonypi sony_acpi backlight loop hci_usb bluetooth eth1394 usb_storage pcmcia snd_hda_intel snd_hda_codec snd_pcm_oss snd_mixer_oss ipw3945 snd_pcm ieee80211 ieee80211_crypt i2c_i801 intel_agp ohci1394 ide_cd firmware_class yenta_socket rsrc_nonstatic pcmcia_core sky2 tifm_7xx1 tifm_core agpgart rtc uhci_hcd psmouse tpm_infineon tpm tpm_bios ieee1394 snd_timer evdev usbcore pcspkr cdrom snd soundcore snd_page_alloc CPU: 0 EIP: 0060:[] Not tainted VLI EFLAGS: 00010246 (2.6.19-rc5-mm2-1 #9) EIP is at class_device_remove_attrs+0xd/0x34 eax: f7f7938c ebx: 00000000 ecx: c012013a edx: 00000000 esi: 00000000 edi: f7f7938c ebp: f71a7df4 esp: f71a7de8 ds: 007b es: 007b ss: 0068 Process rmmod (pid: 2398, ti=f71a6000 task=c1974030 task.ti=f71a6000) Stack: f7f7938c f7f79394 00000000 f71a7e10 c0238d47 00000000 f7f791f4 f7f7938c f7f79230 00000000 f71a7e1c c0238d82 f7f791f4 f71a7e44 f8d49ea9 f8d4f495 013cb08b 00000026 00000187 f8eb5067 00000000 00000000 f8d49ebe f71a7e4c Call Trace: [] class_device_del+0xc0/0xf0 [] class_device_unregister+0xb/0x15 [] nodemgr_remove_ne+0x64/0x79 [ieee1394] [] __nodemgr_remove_host_dev+0xb/0xf [ieee1394] [] device_for_each_child+0x1d/0x46 [] nodemgr_remove_host+0x33/0x90 [ieee1394] [] __unregister_host+0x1b/0x9b [ieee1394] [] highlevel_remove_host+0x24/0x47 [ieee1394] [] hpsb_remove_host+0x3b/0x5d [ieee1394] [] ohci1394_pci_remove+0x47/0x1c7 [ohci1394] [] pci_device_remove+0x19/0x39 [] __device_release_driver+0x71/0x86 [] driver_detach+0x83/0xc4 [] bus_remove_driver+0x5a/0x76 [] driver_unregister+0xb/0x18 [] pci_unregister_driver+0xf/0x5b [] ohci1394_cleanup+0xd/0xf [ohci1394] [] sys_delete_module+0x18c/0x1b5 [] sysenter_past_esp+0x5f/0x85 DWARF2 unwinder stuck at sysenter_past_esp+0x5f/0x85 Leftover inexact backtrace: ======================= Code: c0 08 e8 fb f2 f5 ff 89 c1 5d 89 c8 c3 55 85 c0 89 e5 74 08 83 c0 08 e8 6b d9 f5 ff 5d c3 55 89 e5 57 89 c7 56 53 31 db 8b 70 48 <83> be a4 00 00 00 00 75 09 eb 17 89 f8 e8 d0 ff ff ff 89 da 83 EIP: [] class_device_remove_attrs+0xd/0x34 SS:ESP 0068:f71a7de8